Custom ductwork, fabricated to fit your home
Your ductwork decides how well your heating and cooling actually work. Ducts that are properly sized, built, and sealed move air evenly to every room, for steadier temperatures, quieter operation, and lower energy bills. Off-the-shelf duct rarely fits a home right, which is why we fabricate our own.
Snipps Heating & Air Conditioning has run an in-house sheet metal shop serving Montrose and the Western Slope for nearly 30 years. Our NATE-certified team designs and fabricates custom ductwork to fit your space: new construction, remodels, additions, or fixing duct that was never done right.
Built to fit, sealed to last
When we fabricate and install your ductwork, here's what you get:
Fabricated to fit your space
We build duct to your home's actual layout instead of forcing generic parts to fit: the right sizes, angles, and runs for your space.
Even, efficient airflow
Properly designed duct delivers air evenly to every room, so you get steadier temperatures, fewer hot and cold spots, and lower energy bills.
Built and sealed right
Well-fabricated, properly sealed duct doesn't leak conditioned air into attics and crawlspaces, so the air you pay to heat and cool actually reaches you.
In-house shop, done our way
Because we fabricate in our own shop, we control the quality and can build exactly what your job needs, with no waiting on outside suppliers.
Good ductwork is the part of an HVAC system nobody sees, and the part that quietly determines whether the rest of it works. We build it to do its job.
How we build your ductwork
From first look to final airflow check, here's how a ductwork project goes:
We assess the home and existing duct.
We look at your layout, your system, and any existing ductwork, checking for leaks, bad runs, and rooms that never get enough air.
We design and measure the ducts.
We size and lay out the duct runs for balanced airflow, and take exact measurements so every piece fits the space it's going into.
We fabricate it in our shop.
We fabricate the ductwork to spec in our own sheet metal shop, so it's built to your measurements, not approximated from stock parts.
We install and seal it.
Our NATE-certified technicians install the duct and seal the joints properly, so conditioned air goes where it's supposed to instead of leaking away.
We test airflow and back it up.
We confirm the air is moving evenly the way it should, walk you through what we did, and back our work with our warranty.
Custom ductwork and sheet metal across Montrose and the Western Slope
We're based in Montrose and fabricate ductwork for homes throughout the region. Wherever you are on the Western Slope, there's a good chance we already work in your area:
Montrose
Our home base, where hot, dusty summers make regular maintenance more than worth it.
Sheet metal fabrication in Montrose, COCimarron
A high-country community east of Montrose where preventive care keeps systems reliable.
Sheet metal fabrication in Cimarron, COCrested Butte
A mountain town where seasonal homes especially benefit from a pre-season check.
Sheet metal fabrication in Crested Butte, CODelta
A warmer valley-floor climate that puts heavy demand on cooling systems all summer.
Sheet metal fabrication in Delta, COHotchkiss
A North Fork Valley town where steady summer heat rewards a well-maintained system.
Sheet metal fabrication in Hotchkiss, COOuray
A San Juan mountain town where keeping systems tuned avoids inconvenient breakdowns.
Sheet metal fabrication in Ouray, CORidgway
An Uncompahgre Valley community with homes that benefit from yearly servicing.
Sheet metal fabrication in Ridgway, COSilverton
A high, cold town where keeping the whole HVAC system tuned matters year-round.
Sheet metal fabrication in Silverton, COTelluride
A high-end mountain market where reliable, well-kept systems are the expectation.
Sheet metal fabrication in Telluride, COCedaredge
A Grand Mesa foothills town with warm summers that work cooling systems hard.
Sheet metal fabrication in Cedaredge, COOlathe
Farm country between Montrose and Delta where summer heat demands a healthy system.
Sheet metal fabrication in Olathe, COGunnison
A high-elevation town where keeping the full system tuned matters through hard winters.
Sheet metal fabrication in Gunnison, COLake City
A remote mountain community where a reliable, well-maintained system is a real asset.
Sheet metal fabrication in Lake City, COArrowhead
A mountain residential community where seasonal homes need a dependable pre-season check.
Austin
A rural pocket near Delta where summer heat makes regular AC care pay off.
Crawford
A quiet ranching community where preventive maintenance is worth the drive.
Eckert
A small Surface Creek Valley community we serve alongside neighboring Cedaredge.
Naturita
A West End town where hot, dry summers make tune-ups especially valuable.
Norwood
A high-plateau ranching community where regular service keeps older systems going.
Nucla
A small West End town where dependable maintenance can be hard to come by.
Paonia
A North Fork town of orchards and vineyards we keep comfortable through the season.
Placerville
A river-valley community with scattered mountain homes worth servicing yearly.
Paradox
A remote West End valley where we bring maintenance to homes far off the main road.
Redvale
A small agricultural community near Norwood on the Wright's Mesa plateau.
Sapinero
A community near Blue Mesa Reservoir where weather swings make upkeep important.
Somerset
A North Fork coal-country town where regular service keeps valley homes comfortable.
Uravan
A historic West End site where we extend maintenance service to the surrounding area.
Montrose trusts us to move their air right
The homeowners we build ductwork for tend to say the same thing: rooms that used to be too hot or too cold finally feel even, the system runs quieter, and the whole house is more comfortable.
One team for every corner of your home's comfort
Custom sheet metal is just part of what we do. Full home comfort takes more than one service. We're here for all of it:
Air conditioner repair and installation
Complete service for central air systems, from quick repairs to full replacements sized for your home. We service every make and model and stay available around the clock for emergencies.
Ductless mini-split installation and service
Zoned, efficient heating and cooling for older homes, additions, and rooms your central system can't reach, with no ductwork required. We help you size and place it right.
Heating maintenance, replacement and installation
Furnace and heating service built for long mountain winters, including seasonal tune-ups and replacements when an old system gives out. We help you pick the right setup and install it to last.
Sheet metal fabrication
Custom ductwork and sheet metal fabricated to fit your space, giving ducted homes airflow that's even and efficient. Properly built and sealed ducts mean lower bills and steadier temperatures.
Indoor air quality services
Solutions for the dust, dryness, and stale air of high-desert living, helping your household breathe easier. We assess what's affecting your air and recommend the right fix.
What Montrose homeowners ask about ductwork
Why does ductwork quality matter so much?
Your ducts carry every bit of heated and cooled air through the house. If they're poorly sized, badly routed, or leaky, you get uneven temperatures, higher bills, and a system that works harder than it should, no matter how good the furnace or AC is.
Do you fabricate custom ductwork in-house?
Yes. We run our own sheet metal shop, so we fabricate duct to your home's exact measurements rather than forcing stock parts to fit. That means better airflow and a cleaner install.
Can you fix leaky or noisy existing ducts?
Often, yes. We can seal leaks, replace bad sections, and re-work runs that cause noise or uneven airflow. If the existing duct is beyond repair, we'll tell you straight and fabricate what's needed.
Do you handle new construction and remodels?
Yes. New builds, additions, and remodels are a big part of our sheet metal work. We design and fabricate the ductwork to fit the new space and tie into the rest of the system.
Does better ductwork actually lower my bills?
Do you work with all system types?
Yes. Our NATE-certified technicians fabricate and connect ductwork for all makes and models of heating and cooling equipment, whether or not we installed the system itself.
How long does a ductwork job take?
It depends on the scope. A few repairs and re-sealing go quickly, while a full new-construction or whole-home duct system takes longer. We'll give you a clear timeline with your estimate.
No-obligation estimates, backed by warranties you can count on
Contact us today for a free estimate on custom ductwork or sheet metal fabrication. We respond to most customer inquiries by the next business day.
Need custom ductwork? Let's build it right.
Whether it's a new build, a remodel, or fixing duct that never worked right, well-fabricated ductwork makes your whole system run better. The Snipps team designs and builds it in our own shop and installs it to last, the same standard we've held across the Western Slope for nearly three decades. Call us at (970) 240-8152 or request your free estimate today.
HVAC repairs, maintenance, and installation for homes and businesses across Montrose and the Western Slope. Family-run, certified, and here when you need us since 1996.